Pump head part:1. ZJ, ZG, AH, M, HH slurry pump is a double pump shell structure, that is, the pump body, pump cover with replaceable wear-resisting metal lining (including impeller, jacket, guard plate, etc.).The pump body and pump cover are made of grey cast iron or nodular iron according to the working pressure.The pump body is bolted with a stop and a bracket.Pump outlet direction can be rotated according to eight Angle installation.Impeller front and rear cover with back vane to reduce leakage and improve the service life of the pump.
2. AH slurry pump
This series of pumps are horizontal, vertical medium type, double pump shell structure slurry pump.Pump body and pump cover with replaceable metal lining, lining material for high chromium wear resistant alloy material, lining can be used until wear through, extend the maintenance cycle, reduce the cost of operation.Pump outlet direction can be installed by 8 rotation Angle.
Bearing assembly: the bearing assembly of the pump adopts cylindrical structure, which is convenient to adjust the clearance between impeller and front guard plate, and can be removed as a whole during maintenance.Bearings are lubricated with grease.
Shaft seal (seal) : the pump shaft seal type has packing seal, impeller seal, mechanical seal.
Transmission mode: v-shaped triangle belt transmission, elastic shaft transmission, gear reducer transmission, hydraulic coupling transmission, frequency conversion drive device, thyristor speed regulation, etc.V-shaped triangular belt transmission CR, CL, CV, ZV, ZL, ZR transmission.
Overall performance: pump performance range, cavitation performance, high efficiency. Multi-stage series technology can be used to satisfy long-distance transportation.There are a variety of metals available for flow components, and the depth is increased.Adopt a variety of speed and a variety of variation mode, so that the pump in a better mining operation.Long service life, high operating efficiency, can meet a variety of harsh transport conditions.
3, SP type slurry pump, for vertical slurry pump, pump body pump cover and shaft is vertical vertical.ZL is also a single shell pump, pump body pump cover can be made of metal or rubber.
4, slurry pump pump head professional name is the pump body and pump cover.The so-called head of the general slurry pump should include the pump body and pump cover part.Pump body is mainly connected to the rotor of the pump, through the bearing impeller, seal, the bearing assembly is connected.Pump cover is the corresponding part of the pump body, and the pump cover together to form a closed cavity.The inner lining of slurry pump is the pump body and pump cover.Lining material is generally rubber and high chromium alloy, according to the general mining conditions of the pump lining is rubber or metal alloy.
5. The inlet of each type of pump is in the horizontal direction, and the pump rotates clockwise from the driving direction.